I signed up for a twitter account this morning. Looked over the API, and by 9:30 had integrated parts of it into the library website. Staff with twitter accounts now display their current “tweet” on the library website. Not one to be satisfied with that… I created a new program for use in our library system that now automatically “tweets” every time someone checks out a book from the new book display.
I was surprised to see how busy it was at the polling place. One of the election judges, who has known me since i was in grade school, said they actually had a line outside the building when they opened. That is very rare in Somonauk apparently.
To say thank you, seems such an underpowered statement, but Thank You!!! Christopher, Zack, Laura, Jeremy, Emily, Luke, Steve, Scott, and of course my mother.
I could not have pulled off such a wonderful night without you all! I am eternally grateful for all of your help, professional behavior, and your willingness to put up with some of my more eccentric behaviors and requests.
We had 339 kids, and 5 dogs that made it to the porch this year, shy of last years total by 9 kids. Never the less we put on one incredible show and I could not have done it without all of your help.
What are you all doing next Halloween? 🙂
Laura and her camera were everywhere taking WONDERFUL shots of the action, which I will post soon, Jeremy took video for me which I will look over and post some of that when I get the chance, and Scott also took a bunch of pictures and once I get them I will post them as well.
A few months back I posted a picture of a strange looking box. I also asked people to guess what the box did. There were some good guess, but none that hit it 100%.
The box, contained a programmable micro controller board. It also contained a small circuit to interface with the “Try Me” button for an off the shelf Gargoyle I bought at Walgreens.
The box, combined with the gargoyle, some home brew LED spotlights, a hacked Dance Dance Revolution Mat, a plaster pedestal I painted to look like marble, and a nice alcove in a set of our bushes, creates my latest scene for Halloween.
The visitor walks past a set of bushes, when suddenly the alcove lights up, showing a gargoyle, the gargoyle opens his eyes, and begins to speak. When he is finished, he closes his eyes again, and the lights dim.
A few years ago, when I got my first Prop-1 controller form EFX-TEK I set it up to control my popup jumper, and my squawking crow. Initially, the only way I could come up with a way to set off the crow was to insert a relay inline with the “try me” button on its bottom. This worked fine, except that it had the distinct disadvantage of requiring a cable leading from the crow to the controller. Later After I had that all working, I purchased a ghoul that “flew” down a rope and back. It too had a poor activation method, that I wanted to bypass. This time, due to the nature of the prop, I could NOT use any wired connection. This meant wireless. I looked online for some wireless transmitters and receivers, and found them to be cost prohibitive. This annoyed me greatly, until I was browsing the clearance isle at Wal-Mart and found a radio controlled car for $1. At that, an idea was born. I quickly snatched up the car, and dismantled it in the parking lot. I looked over the circuits to find they looked very simple, and easily modifiable. So I drove to radio shack, picked up a few parts and when I got home wired a buzzer up in place of one of the motors, and glued the receiver, and a separate power pack under the gouls cloak, and sure enough, when i pressed a button on the remote, the ghoul would hear the buzzer and start moving. I wasn’t thinking then, as I shoudl have went back and picked up 4 more of the RC cars to allow me to control up to 5 items (forward, reverse, left, right, turbo) from the one controller.
Flash forward to today, I recently went to the dollar store and picked up 5 cheap RC cars, all to my luck, having very tiny receiver boards. This morning, I sat down with the receiver board, and using my limited knowledge of electronics, wired it directly into my crows control circuitry. Now, the crow still functions as it did out of the box, but also sports a fully internal radio receiver. With the press of a button on the remote, or once I’m done, a signal from the micro-controller running the show, the crow will activate. Best part, there are NO wires, I can put the crow anywhere within a 15 ft radius of the transmitter and still have him work just fine. This should, in theory, also allow me to carry a controller with me where I can trigger him, and other props at will. MUAHAHAHAHAHAAHAHAHAHAH
It is said, a friend will help you kill someone, but a real friend will help you bury the body.
Well, qualifies as a real friend. (Not that that was ever in doubt) Ok so there wasn’t actually a body, but I know very few people that would drive out here to help me dig a two foot deep trench, (26 to 28 inches in some places) to help me bury conduit to repair my yard light.
Eighteen years ago while planting a rose bush for my mother, I accidentally cut through the direct burial cable that ran to our yard light. This of course sucked badly, fortunately I was extremely lucky and was not harmed. So, with nothing more than a shoestring budget, I set out to repair the light. I made quite a few mistakes, but the end result had the wiring in conduit, and a little safer. It lasted for quite a few years. The past two years I started having trouble with it tripping the ground fault interrupter a lot, and I decided that I would need to replace it all again. Now that I have a full time job, and have paid off all my credit card debt, I could afford to do it right.
Today, at around 11:00, Karl arrived to find me digging the beginnings of the new trench for the conduit. After a few shovel fulls of dirt the larger shovel split its handle out, so we ran to go buy some better shovels for the job. After returning we trenched, by hand, a 30 foot long trench that ranged from 26″ to 28″ inches deep and ran from my house to the yard light. It took us a while, but we did it, and I am glad that the conduit is now the recommended dept. Previously when I did it myself at age 14, I was a lazy bum and the “trench” was no more than 6 inches below ground… I knew that was too shallow, but at 14, I didn’t care. Once the trench was dug, we set about laying the conduit. As we did I discovered, the outdoor outlet post I had purchased had an added surprise. It could be configured, through the use of an insert into a dual purpose, high and low voltage post. I couldn’t resist this opportunity so while I set about cleaning up the underground knock out hole in the lamp post Karl headed off to get more conduit so I could have a separate run of conduit for low voltage items, such as speaker wire, video, or data. Just imagine the possibilities if what I could do if my yard is wired for sound… MUAHAHAHAHAHAHAHAHA be afraid, be very afraid…
By the time Karl returned, I had ran the wire for the lamp post to the outlet post, and while he assembled the low voltage conduit run, I ran the wire from the outlet post back to the house. Once that was done, and all of the connections were made, we tested the circuit, and everything checked out. It’s important to note, that Karl changed the blown light bulb for me, the real reason the light was not working the past month… (Ok, simplest solution, I know….)
Now though, I feel 100% safe in the knowledge that the wiring to the yard, that I rely on heavily for Halloween, and Christmas displays is now safe, and water tight. Thank you Karl, Thank you Ladies at Ace Hardware who must have thought we were nuts… Oh, and thank you neighbors, who stopped to ask if I was working on my Halloween display… MUAHAHAHAH… Ya know… I should have ran a 3rd conduit while we were at it… one for Pneumatics… 🙂 Oh well, next time… 🙂 Hey Karl, what are you doing tomorrow? 😉